621K - Tier 2

621K - Tier 2

Quick loading, high travel speeds and the ability to load and dump on the run yield fast cycle times, allowing Cat Wheel Tractor-Scrapers to consistently deliver high productivity at the lowest cost per ton.

Flywheel Power - Tractor/Scraper 304 kW (407 hp)
Scraper Capacity - Heaped 18.4 m³
Top Speed - Loaded 53.9 km/h

Technicial Specifications

Tractor Engine
Flywheel Power - Tractor/Scraper 304 kW (407 hp)
Scraper Bowl
Scraper Capacity - Heaped 18.4 m³
Transmission
Top Speed - Loaded 53.9 km/h
Dimensions
Width - Overall Machine 3585 mm
Width - Tractor 3381 mm
Width - Inside of Bowl 3048 mm
Width - Outside Rear Tires 3275 mm
Height - Overall Shipping 4029 mm
Height - Top of Cab 3612 mm
Ground Clearance - Tractor 557 mm
Front of Tractor to Front Axle 3119 mm
Axle to Vertical Hitch Pin 540 mm
Height - Scraper Blade Maximum 520 mm
Wheel Base 7998 mm
Rear Axle - Rear of Machine 2898 mm
Width - Rear Tire Centers 2290 mm
Width - Overall Machine - Ladder Down 3790 mm
Length - Maximum (Push-Pull) 15576 mm
Length - Overall Machine - Standard 14015 mm
General
180° Curb-to-Curb Turning Width 11.8 m
Overall Shipping Height 4.03 m
Maximum Depth of Cut 315 mm
Fuel Tank Refill Capacity - Scraper 763 l
Scraper Capacity - Heaped 18.4 m³
Top Speed - Loaded 53.9 km/h
Scraper Capacity - Struck 13 m³
Overall Width 3.57 m
Maximum Depth of Spread 540 mm
Width - Cut 3.14 m
Tires - Scraper 33.25R29**E3
Tires - Tractor Drive 33.25R29**E3
Rated Load 26 127 kg (57,610 lb); 26.19 tonnes (28.81 tons)
Engine
Rated Engine RPM - Tractor 2000 r/min
Flywheel Power - Tractor 304 kW
Note C13 engine emits equivalent to U.S. EPA Tier 2/EU Stage II or U.S. EPA Tier 3/EU Stage III.
Engine Model - Tractor Cat C13
Service Refill Capacities
Cooling System 45 l
Hydraulic System 83 l
Crankcase 30.58 l
Transmission System 93 l
Non Push-Pull
Operating Weight - Empty 36185 kg
Overall Length 14.02 m
Push-Pull
Operating Weight - Empty 36567 kg
Overall Length - With Bail Down 15.58 m
Cab
Exterior Sound Level The exterior sound power level for the standard machine (ISO 6393) is 111.5 dB(A).
ROPS/FOPS Meets ISO standards
Safety Criteria Compliance Standards
Rollover Protection Structure (ROPS) ISO 3471:2008 for up to 17 084 kg (37,664 lb)
Falling Object Protective Structure (FOPS) ISO 3449:2005 Level II
Seat Belt SAE J386:JUN1985
Reverse Alarm ISO 9533:2010
Steering System ISO 5010:2007
Brakes ISO 3450:2011
Travel Speeds - Runout
Transmission Gear - Fifth 21.9 km/h
Transmission Gear - Fourth 16.3 km/h
Transmission Gear - Eighth 53.9 km/h
Transmission Gear - First 5 km/h
Transmission Gear - Second 8.9 km/h
Transmission Gear - Third 12.1 km/h
Transmission Gear - Seventh 39.9 km/h
Transmission Gear - Reverse 9.2 km/h
Transmission Gear - Sixth 29.6 km/h
Implement Cycle Times
Bowl Lower 3.5 s
Ejector Extend 5.2 s
Bowl Raise 3 s
Ejector Retract 6.7 s
Bail Lower 3.2 s
Apron Lower 3.8 s
Apron Raise 2.95 s
Bail Raise 1.8 s

Advantages and Features

PRODUCTIVITY

  • Up to 8% improvement in productivity.
  • Advanced Productivity Electronic Control System (APECS) allows
    the engine and transmission to communicate on a high level. This
    communication allows the machine to better utilize the power
    and torque the engine is producing. The net result is moving more
    material.
  • Use Ground Speed Control to set the desired top speed and the
    machine will find the gear that works best for the engine and the
    transmission, providing a lower fuel burn.
    • The Machine Speed Limit feature replaces Top Gear Selection.
  • Auto-Stall assists in quickly bringing the transmission to an
    operating temperature at start-up when the machine is working in a
    cold climate region.
  • Boost productivity with the Payload Estimator feature (optional
    attachment). Payload Estimator is an automatic feature when
    ordered with Sequence Assist.
  • Cat® Payload Estimator for scrapers is an earthmoving solution for
    optimal payload and jobsite efficiency. Payload Estimator achieves on-the-go weighing by using bowl lift cylinder pressure during the loaded haul segment. Payload Estimator is optimized to be used with Sequence Assist, which provides increased productivity with less operator effort.

OPERATOR COMFORT AND CONTROL

  • Reduce up to 14 individual operator commands per cycle with
    Sequence Assist (optional attachment).
    • Steer with less effort using the newly designed high-pressure
    steering system.
  • Enjoy interior improvements and a more ergonomic work
    environment with a 21% larger cab than the G Series cab.
  • Intuitive, ergonomic controls keep operators focused on their work.
  • Maintain desired cab temperature with automatic temperature
    control.

BUILT-IN SAFETY

  • Get in and out of the cab easier with the new powered access
    ladder system (optional attachment).
  • Enhance an operator’s awareness of site surroundings with the
    optional Work Area Vision System (WAVS).
  • Seat belt indicator provides visual and audible alerts when the seat
    belt is not in use.
  • Advanced Cushion Hitch allows the cushion hitch to prevent end
    stroke by having the ability to predict end stroke events and manage
    the rate of dampening, resulting in reduced hitch maintenance and
    improved operator ride in rough conditions.

EASE OF OPERATIONS

  • The spacious cab features easy, intuitive controls and excellent
    visibility. The cab provides a comfortable working environment for
    all-day operation.
  • Cat Advanced Ride Management (ARM) seat suspension reduces
    end stroke movement of the load cylinder for a smoother ride.
  • Engine overspeed protection will automatically engage with no operator input when the machine is in eighth gear. The machine
    will assist in slowing the machine speed by canceling the throttle
    command and engaging the engine compression brake.

CAT TECHNOLOGY

  • Monitor, manage, and enhance jobsite operations.
  • Hit target grade faster and more accurately with Cat Grade technologies. Finish jobs in fewer passes and with less operator effort, saving you time and helping to increase profit.
  • Product Link™ collects machine data that can be viewed online through web and mobile applications (optional attachment).

EFFICIENCY

  • The new tractor hydraulic on-demand fan helps assist in lower fuel consumption.
  • Using draft-arm overflow guards diverts material away from the bowl, preventing material from getting caught between the draft arms and the bowl sides.
  • Cat Grade Control (optional attachment) intelligently ensures the machine does not cut below grade in a cut area or overfill in the fill area.

Standard Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • POWER TRAIN – TRACTOR
    • Cat C13
    • Cat engine brake
    • Electric start, 24 Volt
    • Air cleaner, dry type with precleaner
    • Fan, hydraulic
    • Ground level engine shutdown
    • Radiator, aluminum unit core, 9 fins per inch
    • Guard, crankcase
    • Muffler (only for less or non-regulated regions engine arrangement only)
    • Starting aid, ether
    • Braking system:
      – Primary and secondary, wet disc, hydraulic
      – Parking, hydraulic-released, spring-applied
      – Throttle lock
    • Transmission:
      – 8-speed planetary power shift
      – ECPC control
      – APECS software
      – Programmable top gear selection
      – Transmission hold
      – Differential lock
      – Guard, power train
      – Standard tire spin reduction
      – Ground speed control
      – Machine speed limit
      – Differential lock protection
  • POWER TRAIN – SCRAPER
    • Braking system:
      – Primary and secondary, wet disc, hydraulic
  • ELECTRICAL – TRACTOR
    • Alternator, 150 Amp
    • Batteries (4), 12V, 1,000 CCA, maintenance free, high output
    • Electrical system, 24V
    • Lighting system:
      – Headlights, halogen
      – Turn signals with hazard function, LED floodlights, (2) cutting edge (1) bowl, halogen side vision (2)
    • Starting/charging receptacle
  • ELECTRICAL – SCRAPER
    • Alarm, backup
    • Lighting system:
      – Brake lights, LED
      – Turn signals with hazard function, LED
  • OPERATOR ENVIRONMENT – TRACTOR
    • HVAC system, heat, AC, defrost
    • Thermostat control of HVAC system
    • Coat hook
    • Lunchbox platform with holding strap
    • Diagnostic connection (2)
    • 12V power ports (2)
    • Differential lock (1)
    • Dome courtesy light
    • Horn, electric
    • T-Handle implement control
    • Mirror, rearview
    • Radio ready
    • ROPS/FOPS cab, pressurized
    • Keypad switches:
      – Throttle lock
      – Wipers/washers
      – Hazard lights
      – Retarding level select
      – Work lights on, off
      – Information mode on Messenger Display
    • Safety tab rocker switches
    • Seat belt, static two-piece
    • Seat, Cat Advanced Ride Management (ARM), Cat Comfort Series 3, rotates 30 degrees
    • Steering wheel, tilt, telescoping, padded
    • Windows, right side emergency egress
    • Windows, sliding
    • Windows, laminated, zipped in
    • Windshield wipers, front and rear windows, includes washers
    • Door lock
    • Messenger Display
    • Gauges, warnings include:
      – Coolant temperature
      – Engine oil temperature
      – Hydraulic oil temperature
      – Fuel level
      – Park brake
      – Implement lockout
      – Brake system
      – Regeneration required
      – Throttle lock
      – System voltage
      – Secondary steering
      – Bail down
      – Ejector auto
      – Differential lock
      – Apron float
      – Transmission hold
      – Cushion hitch
      – High beam lights
      – Action lamp
      – Engine speed, rpm
      – Gear selection
  • FLUIDS
    • Extended Life Coolant to –37° C (–34° F)
  • OTHER STANDARD EQUIPMENT – TRACTOR
    • Advanced cushion hitch
    • Accumulators (cushion hitch) with Canadian Registration Number (CRN)
    • Fast oil change
    • Fenders, non-metallic
    • Heater, engine coolant 120V
    • Rims (2)
    • Tow pin, front
    • Vandalism locks
    • Heater, engine coolant 120V
  • OTHER STANDARD EQUIPMENT – SCRAPER
    • Bowl
      – 18.4 m³ (24 yd³), heaped
      – 14.1 m³ (18.4 yd³), struck
    • Vandalism locks
    • Hydraulic position sensing cylinders (bowl lift and apron)

Optional Equipment

  • NOTE
    • Standard and optional equipment may vary. Consult your Cat dealer for details.
  • STEERING ARRANGEMENTS
    • Secondary Steering Arrangement
  • INTEGRATED TECHNOLOGIES
    • Sequence Assist Arrangement
    • Load Assist
    • Cat Grade Control with Load Assist
  • OTHER ATTACHMENTS
    • Camera arrangement – WAVS
    • Steering lock – external
    • Cab beacon
    • Air horn
    • Air horn and beacon
    • Fender, scraper
    • Guard, overflow
    • Wiring group
    • Year of manufacture plate
  • WORK LIGHT ATTACHMENTS
    • HID work lights
  • AMBIENT CAPABILITY ARRANGEMENTS
    • Cooling, high ambient HRC
    • Cooling, low ambient HRC
    • Cooling, high ambient LRC
    • Cooling, low ambient LRC
  • SERVICE INSTRUCTIONS
    • Film arrangement – U.S. (ANSI)
    • Film arrangement – International (ISO)