Technicial Specifications
| Nominal Payload Class (100%) | 46.8 t |
| Top Speed - Loaded | 79.7 km/h |
| Target Payload (100%) | 47.2 t |
| Maximum Working Payload (110%) | 51.4 t |
| Maximum Allowable Payload (120%)* | 56.1 t |
| Body Capacity (SAE 2:1)** | 31.2 m³ |
| Note | *Refer to the Caterpillar 10/10/20 Payload Policy for maximum gross machine weight limitations. |
| Note (1) | **ISO 6483:1980. |
| Note (2) | Capacity with Dual Slope body with no liner. |
| Engine Model | Cat® C18 ACERT™ |
| Rated Engine Speed | 1700 r/min |
| Gross Power - SAE J1995:2014 | 451 kW |
| Net Power - SAE J1349:2011 | 410 kW |
| Net Power - ISO 9249 | 410 kW |
| Net Power - 80/1269/EEC | 410 kW |
| Engine Power - ISO 14396 | 446 kW |
| Net Torque - SAE J1349 | 3012 N·m |
| Number of Cylinders | 6 |
| Bore | 145 mm |
| Stroke | 183 mm |
| Displacement | 18.1 l |
| Note (1) | Power rating applies at 1,800 rpm when tested under the specified condition for the specified standard. |
| Note (2) | Ratings based on SAE J1995 standard air conditions of 25° C (77° F) and 100 kPa (29.61 Hg) barometer. Power based on fuel having API gravity of 35 at 16° C (60° F) and an LHV of 42 780 kJ/kg (18,390 BTU/lb) when engine used at 30° C (86° F). |
| Note (3) | No engine derating required up to 3000 m (9,843 ft) altitude. |
| Note (4) | Available as Tier 3/Stage IIIA equivalent, OR Tier 2/Stage II equivalent emission standards. |
| Note (5) | Meets China Nonroad Stage III emission standards equivalent to U.S. EPA Tier 3 or U.S. EPA Tier 2. |
| Target Gross Machine Operating Weight | 82100 kg |
| Chassis Weight | 26863 kg |
| Body Weight | 8258 kg |
| Note (1) | Chassis weight with 100% fuel, hoist, body mounting group, rims and tires. |
| Note (2) | Body weight is the standard Dual Slope body with no liner and will vary depending on configuration. |
| Target Gross Machine Weight | 82100 kg |
| Brake Surface - Front | 1395 cm² |
| Brake Surface - Rear | 50281 cm² |
| Brake Standards | ISO 3450:2011 |
| Pump Flow - High Idle | 425 L/min |
| Relief Valve Setting - Raise | 18950 kPa |
| Relief Valve Setting - Lower | 3450 kPa |
| Body Raise Time - High Idle | 8 s |
| Body Lower Time - Float | 10 s |
| Body Power Down - High Idle | 10 s |
| Struck | 23.9 m³ |
| Heaped (SAE 2:1)* | 31.2 m³ |
| Note (1) | Contact your local Cat dealer for body recommendation. |
| Note (2) | *ISO 6483:1980. |
| Struck | 23.9 m³ |
| Heaped (SAE 2:1)* | 31.3 m³ |
| Note (1) | Contact your local Cat dealer for body recommendation. |
| Note (2) | *ISO 6483:1980. |
| Front Axle - Empty | 51.4 % |
| Front Axle - Loaded | 34.2 % |
| Rear Axle - Empty | 48.6 % |
| Rear Axle - Loaded | 65.8 % |
| Empty Loaded Cylinder Stroke Front | 234 mm |
| Empty Loaded Cylinder Stroke Rear | 149 mm |
| Rear Axle - Oscillation | 8.9° |
| Fuel Tank | 530 l |
| Cooling System | 125 l |
| Crankcase | 64 l |
| Differential - Final Drives | 180.1 l |
| Steering Tank | 55 l |
| Steering System - Includes Tank | 87.01 l |
| Brake/Hoist Hydraulic Tank | 176 l |
| Brake Hoist System | 227 l |
| Torque Converter - Transmission System | 64.01 l |
| Steering Standards | SAE J1511 FEB94 ISO 5010:2007 |
| Steer Angle | 40.5° |
| Turning Diameter - Front | 17.6 m |
| Turning Circle - Clearance Diameter | 20.3 m |
| Standard Tire | 21.00R33 (E4) |
| Note (1) | Productive capabilities of the 772G truck are such that, under certain job conditions, TKPH (TMPH) capabilities of standard or optional tires could be exceeded and, therefore, limit production. |
| Note (2) | Caterpillar recommends the customer evaluates all job conditions and consults the tire manufacturer for proper tire selection. |
| Forward - 1 | 12.8 km/h |
| Forward - 2 | 17.5 km/h |
| Forward - 3 | 23.7 km/h |
| Forward - 4 | 31.9 km/h |
| Forward - 5 | 43.3 km/h |
| Forward - 6 | 58.4 km/h |
| Forward - 7 | 79.2 km/h |
| Reverse | 16.8 km/h |
| Note | Maximum travel speeds with standard 21.00R33 (E4) tires. |
| Differential Ratio | 2.74:1 |
| Planetary Ratio | 4.80:1 |
| Total Reduction Ratio | 13.14:1 |
| ROPS Standards | Rollover Protective Structure (ROPS) for cab offered by Caterpillar meets ISO 3471:2008 ROPS criteria. |
| FOPS Standards | Falling Objects Protective Structure (FOPS) meets ISO 3449:2005 Level II FOPS criteria. |
| Overall Tire Width | 3907 mm |
| Loading Height - Empty | 3570 mm |
| Overall Length | 8808 mm |
| Operating Width | 4780 mm |
| Centerline of Rear Dual Tire Width | 2652 mm |
| Inside Body Length | 5781 mm |
| Rear Axle - Clearance | 572 mm |
| Centerline Front Tire Width | 3165 mm |
| Ground Clearance | 618 mm |
| Front Canopy Height | 4159 mm |
| Rear Axle - Tail | 2598 mm |
| Overall Height - Body Raised | 8257 mm |
| Height - Top of ROPS | 3907 mm |
| Outside Body Width | 3931 mm |
| Overall Body Length | 8164 mm |
| Inside Body Width | 3642 mm |
| Engine Guard Clearance | 618 mm |
| Wheel Base | 3960 mm |
| Inside Body Depth - Maximum | 1747 mm |
| Dump Clearance | 562 mm |
Advantages and Features
ACHIEVE GREATER PRODUCTIVITY
- Get the right body option—Dual Slope, Flat Floor, or Quarry—for your material and jobsite needs.
- For haul profiles including steep slopes, an optional Dual Slope body is available—offering excellent material retention.
- The flat floor body is perfect for metering material, especially when
feeding the crusher. - Optimize your body life by selecting a liner package best suited
for your application. We offer steel liners that work for most applications as well as rubber liners for extreme applications.
BOOST FUEL EFFICIENCY
- Up to 10% less fuel consumption.
- Advanced Productivity Electronic Control System (APECS) allows the engine and transmission to communicate on a high level. This communication allows the machine to better utilize the power andtorque the engine is producing.
- Automatically optimize fuel consumption with the feature—Adaptive Economy mode reduces fuel use without affecting productivity and can be engaged with a single button.
- Gain improvements in fuel efficiency with auto neutral idle.
- Haul your 770 truck at a more fuel-efficient engine speed and gear selection with speed limiting.
- Conserve fuel with integrated Engine Idle Shutdown by the engine automatically initiating when the truck is in park and idle for a preset amount of time.
DESIGNED FOR SAFETY
- Improvements in accessibility with safe, ground-level access tofuel fill and daily maintenance points.
- Ensure three points of contact when entering and exiting the machine with strategically placed walkways and grab rails.
- Superior brake performance meets the latest brake standards—
ISO 3450:2011. - The ground-level engine shut-off switch stops all fuel to the engine when activated and shuts down the machine safely.
- Sturdy 4-point mounted cabin meets rollover protective structure/
falling objects protective structure (ROPS/FOPS) standard. - 4-point seat belt provides enhanced safety to the operator.
- Seat belt indicator implements both visual and audible alerts to the
operator when seat belt is not fastened. - Lockout features help the service technician to perform
maintenance work on the machine with safe mode. - Secondary steering activates automatically in case of primary
system failure. - Overload speed limiter works with truck payload system to reduce
machine speed automatically when the truck is overloaded.
WORK IN COMFORT
- Completely redesigned cab for a whole new standard in visibility, comfort, and productivity.
- The new operator seat placement provides easier operation and comfort to the operator.
- Improvements in enlarged views of the work area and its surroundings.
- Access connectivity and decrease clutter with more storage areas in the newly designed cab.
- Automatic cab temperature controls.
- Cat next-generation deluxe seat for better operator comfort.
TECHNOLOGY THAT GETS WORK DONE
- Integrated systems give you the ability to make timely, fact-based decisions to maximize efficiency, improve productivity, and lower costs.
- Gain valuable insight into how your machine is performing by continuously monitoring and collecting vital machine dta via the advisor display with the software Bital Information Management System (VIMS™). Applicable to both U.S. EPA Tier 4 Final/EU Stage V and U.S. EPA Tier 2 equivalent.
- Truck Production Management System (TPMS) provides accurate weighing of the materials, stores 2,400 payload cycles, and reportson, haul cycle times, and distances with date and time stamps.
- External payload indicator lights alert the loader when to stop, reducing the risk of machine overloading.
- Product Link™ system connects to each machine wirelessly, allowing you to monitor location, hours, fuel use, productivity, idletime, and diagnostic codes.
- VisionLink®wirelessly connects you to your equipment, givingyou access to essential information you need to know to run your business.
- The Cat 770 is MineStar™ ready and includes Cat Product LinkElite and VIMS to help optimize equipment management, remotemonitoring capabilities, machine availability, and component life while reducing both repair costs and the risk of catastrophic failure.
- Tons kilometers per hour/tons miles per hour (TKPH/TMPH) tire
management system works with TPMS for improved tire life.
REDUCED MAINTENANCE COST AND OTHER COSTS
• Grouped service points.
• Control particulate matter with two engine-mounted diesel
oxidation catalyst canisters. (Tier 4)
• NOx reduction system (NRS) technology replaces a portion of intake air with exhaust gas to control combustion temperatures and
NOx production. (Tier 4)
• Parts commonality with other Cat equipment.
• Resolve problems before failure occurs with VIMS notifications.
• Torque converter stall (autostall) enables quick operating temperatures for best performance life.
• All LED lights provide longer life, brighter light, consume less power, and are more resistant to vibration or water damage.
APPLICATION VERSATILITY
- Get the right body option—Dual Slope, Flat Floor, or Quarry—for your material and jobsite needs.
- For haul profiles including steep slopes, an optional Dual Slope body is available—offering excellent material retention.
- The flat floor body is perfect for metering material, especially when
feeding the crusher. - Optimize your body life by selecting a liner package best suited
for your application. We offer steel liners that work for most applications as well as rubber liners for extreme applications.
Standard Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
ELECTRICAL
- Alarm, backup
- Alternator, 115 ampere
- Auxiliary jump start receptacle
- Batteries, maintenance-free, 12V (2), 190 amp-hour
- Electrical system, 24V
- Lighting system: - Backup light (halogen) - Directional signals/hazard warning (front and rear LED) - Headlights, (halogen) with dimmer - Operator access courtesy lights (Developing Market Only)
-
PRODUCT LINK COMMUNICATIONS
- Product Link Ready
-
GUARDS
- Driveline
- Engine crankcase
-
OPERATOR ENVIRONMENT
- Air conditioning (Developing Market Only)
- Ashtray and cigarette lighter
- Coat hook
- Cup holders (4)
- Diagnostic connection port, 24V
- Entertainment Radio Ready: - 5 amp converter - Speakers - Antenna - Wiring harness
- Gauges/indicators: - Air cleaner service indicator - electronic - Brake oil temperature gauge - Coolant temperature gauge - Hour meter - Tachometer - Engine overspeed indicator - Fuel level - Speedometer with odometer - Transmission gear indicator
- Heater/defroster (11 070 kCal/43,930 BTU)
- Hoist lever
- Horn, electric
- Light - dome
- Light - courtesy
- Messenger, display unit
- Mirrors
- Power port, 12V
- ROPS cab, insulated/sound suppressed
- Seat, Cat Comfort: - Full air suspension - Retractable 3 point seat belt with shoulder harness
- Seat, training with lap belt
- Steering wheel, padded, tilt and telescopic
- Storage compartment
- Sun visor, tinted glass
- Throttle lock
- Windshield wiper (intermittent) and washer
-
POWER TRAIN
- Air-To-Air Aftercooler (ATAAC)
- Air cleaner with precleaner (1)
- Automatic cold mode idle control
- Electric start
- Turbocharger
- Braking system, hydraulic actuated: - Automatic Retarder Control (ARC) (utilizes rear oil-cooled, multiple disc brakes) - Brake release motor (towing) - Caliper-disc (front) - Extended Life Brakes - Oil-cooled, multiple disc (rear) - Parking - Secondary - Service
- Transmission: - 7 speed automatic powershift - Body up-shift inhibitor - Controlled throttle shifting - Directional shift management - Downshift inhibitor - Neutral start switch - Neutral coast inhibitor - Reverse shift inhibitor - Reverse neutralizer during dumping - Programmable top gear selection
-
SUSPENSION SYSTEMS
- Suspension, front and rear
-
OTHER STANDARD EQUIPMENT
- Body safety pin (secures body in up position)
- Body down indicator
- CD ROM parts book
- Fan, hydraulic demand
- Fuel tank (530 L/140 gal)
- Guard, engine compartment
- Guard, mud
- Ground level battery disconnect
- Ground level engine shutdown
- Ground level grease fittings
- Reservoirs (separate): - Brake/converter/hoist - Steering - Transmission/torque converter
- Rims 15 × 33
- Rock ejectors
- Service platform, left and right side
- Supplemental steering (automatic)
- Tie down eyes
- Tow hooks (front)/Tow pin (rear)
- Vandalism protection locks
-
ANTIFREEZE
- Extended Life Coolant to -35° C (-30° F)
Optional Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
OPTIONAL EQUIPMENT
- Traction Control System (TCS)
- Cat Engine Brake
- Cat C18 ACERT diesel engine as: Tier 2/Stage II equivalent, OR Tier 3/Stage IIIA equivalent
- Body heat
- Diverter box
- 4 batteries
- HID lights
- Truck Production Management System
- Cab heat
- Cab air conditioning
- Product Link
- Backup alarm
- Heated mirrors
- Fuel heater
- Ether aid
- Coolant heater
- Auto lube
- Rear vision camera (WAVS)
- Spare rims
- Wheel chocks
- Body sideboards
