Technicial Specifications
| Net Power | 1297 kW |
| Engine Model | Cat® 3516E |
| Bore | 170 mm |
| Stroke | 215 mm |
| Displacement | 78.1 l |
| Rated Speed | 1,600 rpm |
| Emissions | U.S. EPA Tier 4 Final/EU Stage IV* or U.S. EPA Tier 1/EU Stage I Equivalent |
| Gross Power - SAE J1995 | 1394 kW |
| Peak Torque - 1,200 rpm - SAE J1995 | 11591 N·m |
| Gross Power - ISO 14396 | 1377 kW |
| Torque Rise | 39% |
| Net Power - SAE J1349 - Standard Ambient | 1297 kW |
| Note (4) | *Tier 4 Final/EU Stage IV configuration is ready to meet Stage V emission requirements once in effect. |
| Net Power - SAE J1349 - High Ambient | 1265 kW |
| Note (1) | The power ratings apply when tested under the reference conditions for the specified standard. |
| Note (2) | The net power advertised is the power available at the flywheel when the engine is equipped with fan, alternator, air cleaner, and muffler. |
| Note (3) | The gross power advertised is with the fan at maximum speed. |
| Operating Weight | 242605 kg |
| Bucket Capacity Range | 17.2 - 43.6 m³ (22.3 - 57 yd³) |
| Rated Payload - Standard Lift (Moderate to High Digging Resistance) | 40.8 t |
| Rated Payload - Standard Lift (Low to Moderate Digging Resistance) | 54.4 t |
| Rated Payload - High Lift (Moderate to High Digging Resistance) | 38.1 t |
| Rated Payload - High Lift (Low to Moderate Digging Resistance) | 49.9 t |
| Bucket Capacity Range - Iron Ore | 17.2 - 21.4 m³ (22.3 - 28 yd³) |
| Bucket Capacity Range - Rock | 19.1 - 29.1 m³ (25 - 38 yd³) |
| Bucket Capacity Range - Coal | 32.1 - 43.6 m³ (42 - 57 yd³) |
| Note | *In Low to Moderate Digging Resistance: please contact your local dealer to determine if your application is suitable for this increased rated payload |
| Bucket Capacities | 19.1-43.6 m3 (25-57 yd3) |
| Transmission Type | Cat Planetary Power Shift |
| Forward - 1 | 7.4 km/h |
| Forward - 2 | 12.9 km/h |
| Forward - 3 | 21.9 km/h |
| Reverse - 1 | 8.1 km/h |
| Reverse - 2 | 14.1 km/h |
| Reverse - 3 | 24 km/h |
| Direct Drive - Forward 3 | 24.5 km/h |
| Direct Drive - Reverse 3 | 27 km/h |
| Direct Drive - Reverse 1 | Lock-up disables |
| Direct Drive - Forward 2 | 14 km/h |
| Direct Drive - Reverse 2 | 15.5 km/h |
| Direct Drive - Forward 1 | Lock-up disables |
| Note | Travel speeds based on 58/85-57 tires. |
| Front | Fixed |
| Rear | Trunnion |
| Oscillation Angle | 9° |
| Raise | 12.6 s |
| Dump | 3.1 s |
| Rack Back | 4.9 s |
| Lower Float Down | 4.2 s |
| Total Hydraulic Cycle Time - Empty Bucket | 23.5 s |
| Relief Valve Setting - Lift/Tilt | 32500 kPa |
| Maximum Flow at 1,700 rpm Engine Speed | 2047 l/min |
| Cylinders, Double Acting - Tilt, Bore and Stroke | 310 × 1086 mm (12.2 × 42.8 in) |
| Cylinders, Double Acting - Lift, Bore and Stroke | 370 × 1713 mm (14.6 × 67.4 in) |
| Pilot System | Open Loop and Pressure Reducing |
| Lift/Tilt System - Pump | Variable Displacement Piston |
| Lift/Tilt System - Circuit | Positive Flow Control |
| Hydraulic Tank - Steering and Braking | 379 l |
| Transmission | 416 l |
| Fuel Tank - Standard | 3445 l |
| Hydraulic Tank - Implement and Hydraulic Fan | 1022 l |
| Engine Crankcase | 288 l |
| Cooling System | 520 l |
| Fuel Tank - With 24 hr Attachment | 5678 l |
| Differential - Final Drives - Rear | 757 l |
| Differential - Final Drives - Front | 833 l |
| Oil Renewal System (ORS)* | 75.7 l |
| Diesel Exhaust Fluid (DEF) (Tier 4 Final/Stage IV) | 519 l |
| Note | *Not available on Tier 4 Final machines. Not available in all regions. |
| Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent | 72 dB(A) |
| Machine Sound Level (ISO 6395:2008) | 119 dB(A) |
| Operator Sound Level (ISO 6396:2008) - Tier 4 Final/EU Stage IV* | 72 dB(A) |
| Sound Performance | The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Note | *EU Stage V ready. |
| Maximum Flow at 1,700 rpm Engine Speed | 980 l/min |
| Relief Valve Setting - Steering | 31000 kPa |
| Steering System - Circuit | Pilot, Load Sensing |
| Total Steering Angle | 80 degrees |
| Steering System - Pump | Piston, Variable Displacement |
| Steering Cycle Times - Low Idle | 7.6 s |
| Steering Cycle Times - High Idle | 4.3 s |
| Ambient Capability Hydraulically Driven Demand Fan - Standard | 43 °C |
| Ambient Capability Hydraulically Driven Demand Fan - High (Tier 4 Final) | 53 °C |
| Ambient Capability Hydraulically Driven Demand Fan - High (Tier 1 equivalent) | 55 °C |
| Front Axle Centerline to Bucket Tip | 6503 mm |
| Rack Back Angle - Ground Level | 39.7 degrees |
| Clearance at Maximum Lift | 6167 mm |
| Ground to Top of ROPS | 7118.5 mm |
| Maximum Overall Length | 19508 mm |
| Maximum Overall Height - Bucket Raised | 11771 mm |
| Reach - Maximum Lift | 2821 mm |
| Rack Angle at Maximum Lift | 59.5 degrees |
| Ground to Top of Exhaust Stacks | 7067 mm |
| Ground to Bumper Clearance | 1355 mm |
| Dump Angle at Maximum Lift | –50.0 degrees |
| Width - Over Tires - With Bulge | 5758 mm |
| Ground to Center of Axles | 1820 mm |
| Tread Width | 4300 mm |
| Note | Assumes 22.9 m3 (30 yd3) bucket for standard lift, and 21.4 m3 (28 yd3) bucket for high lift, fitted with Cat Advansys™ heavy duty tips. Assumes tire size 58/85-57. |
| B-Pin Height - Maximum Lift | 8790 mm |
| Rack Back Angle - Carry | 47.7 degrees |
| Rear Axle - Centerline to Bumper | 6205 mm |
| Ground to Lower Hitch Clearance | 898 mm |
| Ground to Top of Hood | 5682 mm |
| Wheel Base | 6800 mm |
| Rack Back Angle - Carry | 53.7 degrees |
| Reach - Maximum Lift | 2688 mm |
| Ground to Lower Hitch Clearance | 898 mm |
| Maximum Overall Length | 20102 mm |
| Ground to Bumper Clearance | 1355 mm |
| Rack Back Angle - Ground Level | 45.0 degrees |
| Tread Width | 4300 mm |
| Clearance at Maximum Lift | 7095 mm |
| Dump Angle at Maximum Lift | –50.0 degrees |
| Rear Axle - Centerline to Bumper | 6205 mm |
| Ground to Center of Axles | 1820 mm |
| Wheel Base | 6800 mm |
| Maximum Overall Height - Bucket Raised | 12545 mm |
| Ground to Top of Hood | 5682 mm |
| Width - Over Tires - With Bulge | 5760 mm |
| B-Pin Height - Maximum Lift | 9647 mm |
| Ground to Top of Exhaust Stacks | 7067 mm |
| Front Axle Centerline to Bucket Tip | 7097 mm |
| Rack Angle at Maximum Lift | 59.4 degrees |
| Ground to Top of ROPS | 7118.5 mm |
| Note | Assumes 22.9 m3 (30 yd3) bucket for standard lift, and 21.4 m3 (28 yd3) bucket for high lift, fitted with Cat Advansys™ heavy duty tips. Assumes tire size 58/85-57. |
| Operator Sound Level (ISO 6396:2008) - Tier 4 Final/EU Stage IV* | 71 dB(A) |
| Note | *EU Stage V ready. |
| Machine Sound Level (ISO 6395:2008) | 117 dB(A) |
| Sound Performance | The measurement was conducted at 70 percent of the maximum engine cooling fan speed. Hearing protection may be needed when the machine is operated with a cab that is not properly maintained or when the doors or windows are open for extended periods or in a noisy environment. |
| Operator Sound Level (ISO 6396:2008) - Tier 1/EU Stage I Equivalent | 71 dB(A) |
| Brakes | ISO 3450:2011 |
Advantages and Features
Structures
Robust Structures
- Your bottom line is improved by highly durable structures that achieve multiple life cycles and withstand the toughest loading conditions.
- Full box-section rear frame resists torsional shock and twisting forces to maximize life of mounted components.
- Frames utilize castings in key areas to maximize frame durability and optimize efficiency.
- Rear axle mounting to frame optimized to better disperse loads for increased structural integrity.
Lift Arms
Your key to maximum uptime and productivity is our field-proven lift arms.
- Excellent visibility to the bucket edges and work area through a Z-bar design.
- High load stresses are absorbed by the solid steel lift arms.
- Enhanced strength in key pin areas through the use of one piece castings.
- Stress relieved lift arms increase durability.
Front Linkage
- To ensure long life and reliability, the linkage pin joints feature a greased pin design and standard automatic lubrication system
Power Train
Impeller Clutch Torque Converter (ICTC) and Rimpull Control System (RCS)
Lower your cost per ton utilizing advanced ICTC and RCS for modulated rimpull.
- Reduce tire slippage and wear by modulating rimpull from 100 to 25 percent while depressing left pedal. After 25 percent rimpull is achieved the left pedal applies the brake.
- Reduce the potential for wheel slippage without reducing hydraulic efficiency with RCS.
- Improve fuel efficiency in certain applications with our lock-up clutch torque converter providing direct drive
Steering and Transmission Integrated Control System (STIC™)
Experience maximum responsiveness and control with STIC that combines directional selection, gear selection and steering into a single lever.
- Simple side-to-side motion turns machine right or left, minimizing operator movements.
- Easy to operate finger controlled gear selection.
- Smoother, faster cycles and less operator fatigue through the use of low effort integrated controls.
Cat Planetary Powershift Transmission
Building your success begins with a best-in-class transmission designed specifically for mining applications.
- Consistent, smooth shifting and efficiency through integrated electronic controls.
- Long life and reliability through heat treated gears.
- Three forward and three reverse speeds to match your application.
Cat 3516E Engine
Durability and reliability continues in the 994K with the proven 3500 Series engines. At the heart of the 994K is the new 3516E engine. Optimum performance is built in through the use of a 16-cylinder, four-stroke design.
- On-demand performance through the use of turbochargers and aftercoolers.
- High Torque Rise – 39% torque rise ensures high lugging forces during digging and acceleration in high rimpull conditions.
- Extended engine life through a longer stroke and lower rpm ratings.
- Quick engine response through the use of electronic controls.
Economy Mode
Enabling maximum productivity and efficiency, all day every day. The 994K systems work hard to save you fuel through advanced technologies. Utilizing On Demand Throttle, operators maintain normal operation with the left pedal and implements while the 994K manages the engine speed.
- Provides similar control and feel to our traditional throttle lock feature.
- Efficiency of manual throttle and the ergonomics of throttle lock.
Hydraulics
Positive Flow Control Hydraulics
- Increase efficiency through our Positive Flow Control (PFC) Hydraulic System. PFC has concurrent pump and valve control. By optimizing pump control, hydraulic oil flow is proportionate to implement lever movement.
- Fast, productive cycles enabled by four electronically controlled, fully variable piston pumps.
- Increased bucket feel and control.
- Consistent performance and efficiency with lower system heat.
Electro Hydraulic Controls
- Increase operator productivity with these implement features.
- Operate comfortably through electronically controlled hydraulic cylinder stops.
- Handle easy-to-use soft detent controls.
- Conveniently set automatic implement kickouts from inside the cab.
- Joystick or single axis levers now available.
Steering System
- Confident loader operation starts with precise machine control enabled by the 994K's load sensing hydraulic steering system.
- Efficient variable displacement piston pumps.
- Achieve precise positioning for easy loading in tight areas with 40 degrees of steering articulation.
- Enhance operator comfort with integrated steering and transmission control functions.
Filtration System
- Benefit from extended performance and reliability of your hydraulic system with our advanced filtration system.
- Lift/tilt case drain filters.
- Lift/tilt high pressure screens.
- Steering case drain filters.
- Steering high pressure screens.
- Hydraulic case drain filters.
- Power train filters for transmission, torque converter, and pump drives.
- Front and rear brake oil screens.
Cooling System
- A standard demand fan to improve efficiency and cooling performance.
- Optional high ambient package for hot climate conditions.
- Optional fan control to enable proper cooling performance in cold weather.
Operator Station
Your operators can work more efficiently and stay comfortable with our customer-inspired cab features.
Delux Operator Seat
Enhance comfort and reduce operator fatigue with Cat Comfort Series III seat.
- Available heated and ventilated seat featuring leather seat bolster surfaces.
- High back design and extra thick, contoured cushions.
- Air suspension system.
- Easy-to-reach seat levers and controls for six way adjustments.
- Seat-mounted implement pod and STIC steer that moves with the seat.
- 76 mm (3 in) wide retractable seat belt.
- Fold up STIC steer/armrest.
Trainer Seat
Conveniently train other operators in comfort with our standard training seat.
- 76 mm (3 in) wide, retractable seat belt.
- Fold-down design with molded drink tray and storage.
Environment
Your operator's productivity is enhanced with our clean, comfortable cab environment.
- Experience reduced vibrations from viscous cab mounts and air seat suspension.
- Maintain desired cab temperature with automatic temperature controls.
- Pressurized cab with pressure indicator.
- Low operator sound levels.
- Available heated and ventilated seats featuring leather covered seat bolster and headrest.
Technology Solutions
- Integrated electronics provide flexible levels of information to both the site and the operator. This integration creates a smart machine and more informed operator, maximizing the productivity of both.
Information Display
- We have worked hard to help our customers and operators perform at their best through our newly upgraded touch screen information display.
- Intuitive operation and easy navigation with our enhanced user interface.
- Decrease service time by keeping operators informed about machine systems.
Vital Information Management System (VIMS™)
- Connect directly to the machine for access to a wide range of sensor information and enhanced machine data.
- Create productivity reports with payload and work cycle segmentation.
- Identify operator training needs through productivity data.
- Detailed data logging of machine parameters and diagnostic codes.
- Track machine sensor information with trend analysis and histograms to monitor machine health.
Cat Production Measurement (CPM)
- Cat Production Measurement brings payload weighing to the cab so operators can work more productively and deliver accurate loads with confidence. CPM brings advanced weighing modes which assist with payload accuracy and speed the loading cycle.
Cat MineStar System
Cat MineStar System is the industry's broadest suite of integrated mine operations and mobile equipment management technologies, configurable to suit your operation's needs. Its capability sets – Fleet, Terrain, Detect, Health and Command – contain a range of technologies that let you manage everything from fleet assignment and condition monitoring to remote and autonomous control. The 994K can take advantage of many of these advanced technologies, some of which are standard out of the factory.
Fleet
Fleet provides comprehensive, real-time machine tracking, assignment and productivity management, giving you a comprehensive overview of all operations from anywhere in the world.
Terrain for Loading
Terrain with your 994K enables high-precision management of loading operations through the use of guidance technology. It increases 994K's productivity and provides you real-time feedback for improved efficiency.
Detect
Detect helps increase operator awareness, enhancing safety at your operation. It includes a range of capabilities designed to assist the operator with areas of limited visibility around fixed and mobile equipment.
Health
Health delivers critical event-based machine condition and operating data for your entire fleet. It includes comprehensive equipment health and asset monitoring capabilities, with a wide range of diagnostic, analytic and reporting tools.
Safety
We are constantly improving our products in an effort to provide a safe work environment for the operator and those who work on your job site.
Machine Access
- Wider stairs with 45 degree angles provide easy access for operators getting on and off the 994K.
- Wide walkways with non-skid surfaces and integrated lock out/tag out points are designed into the service areas.
- Windshield cleaning platforms provide safe and convenient access for the operator.
- Maintain three points of contact at all times through ground level or platform accessible service areas.
- Emergency egress ladder provides a third exit, if needed.
Visibility
- Cat Detect, which includes Cat Vision plus an optional object detection radar system, enhances operator awareness around the machine.
- Standard LED lights provide excellent workspace visibility.
- LED warning lights, programmable for site-specific signaling.
- Six mirror system improves operator line of sight to the side and rear of the machine. Heated option also available.
- Standard pull down window shade.
- Higher cab position for improved visibility during truck loading operations.
Operator Environment
- Viscous cab mounts and seat air suspension reduce vibrations from the machine to the operator.
- Low interior sound levels.
- Standard 76 mm (3 in) seat belt with minder.
- Optional 4 point harness with minder.
- Operator training seat with standard 76 mm (3 in) seat belt facilitates convenient new operator training.
Powered Access System
The Cat powered access system allows easier access to the primary stairs by improving ingress and egress to and from the rear platform.
- Safe, ergonomic access system.
- All operators have adequate space when using the wide stairway.
- Operators maintain three-point contact when using full handrails on each side.
- Raise and lower stairs from cab level or ground.
Serviceability
We help you succeed by ensuring your 994K has design features to increase uptime.
- The standard, comprehensive filtration system maintains clean fluids to enable high component reliability.
- Safe and convenient service with ground level or platform access and grouped service points.
- Swing-out doors on both sides of the engine compartment provide easy access to important daily service checks.
- Ecology drains for ease of service and prevention of spills.
- Centralized remote pressure taps.
- Reduce downtime with VIMS system notifications so your operators and technicians can resolve any problems before failure.
- Powered fresh air filter extends cab filter life.
- Optional lighting for main service compartments.
Customer Support
Superior Cat Dealer Support
A valued partner, your Cat dealer is available whenever you need them.
- Preventive maintenance programs and guaranteed maintenance contracts.
- Best-in-class parts availability.
- Improve your efficiency with operator training.
- Genuine Cat Remanufactured parts.
Sustainability
Environmental responsibility is designed and built into our 994K's features.
- Increased fuel efficiency results in less fuel consumption and fewer emissions than mechanical drive counterparts.
- Engine Idle Shutdown can help you save fuel by avoiding unnecessary idling.
- Built for multiple lives, the Cat 994 is one of the most rebuilt products. To assist with maximizing machine life, Caterpillar provides a number of sustainable options such as our Reman and Certified Rebuild programs. In these programs, reused or remanufactured components can deliver cost savings of 40 to 70 percent, which lowers operating cost while reducing waste to help conserve natural resources.
- Caterpillar offers retrofit packages to bring new features to older machines, maximizing your resource. When you go through the Cat Certified Rebuild program, these retrofit kits are part of the rebuild process.
- Fluids are better controlled through use of Cat anti-drain filter housings and component ecology drains.
Buckets and Ground Engaging Tools
Increase Productivity and Fuel Efficiency
Performance Series Buckets are designed for superior performance in a variety of materials. They are engineered to dig into piles quickly and load efficiently. Fill factors are up to 115% so you can get your job done and move on to other tasks. Fast load cycles and fewer trips mean less wear and tear on your machine and keep you working.
The buckets below are part of the Performance Series line. They come in different capacities and widths to fit your loading and carrying needs.
Rock Buckets
Designed for use in bank or face loading of limestone and other unprocessed rock. Application also includes truck and hopper loading for a wide range of quarry materials. GET includes spade nose cutting edge with adapters, half arrow segments, bottom wear plates, boxed wings and side bar protectors.
Heavy Duty Rock Buckets
Designed for use in applications like face loading tightly compacted pit materials or handling materials of moderate abrasion and high impacts. GET are similar to the rock bucket with the additions of cutting edge shrouds and Mechanically Attached Wear Plate system (MAWPs) on wings and underneath the bucket. Base edge end protection, ski plates, additional side wear plates and an extra set of side bar protectors are also included.
Iron Ore Buckets
Designed for use in extremely aggressive applications like face loading. They are built for high abrasion and moderate impact. GET are the same as Heavy Duty Rock buckets, except smaller in bucket capacity to accommodate for the higher density.
Coal Buckets
Designed for use in applications with light density and non-abrasive materials. GET includes a straight base edge with adapters and half arrow segments.
Ground Engaging Tools
Protect expensive components. Reduce your operating costs. Get the most out of your machine's performance. Choose from a variety of performance-built GET like these to meet your application requirements.
- CapSure™ Tip Option: Heavy Duty Tip
- CapSure Tip Option: Heavy Abrasion Tip
- CapSure Tip Option: Coal Tip
- CapSure Tip Option: Heavy Penetration Tip
- Edge Protection Option: CapSure Shrouds
- Edge Protection Option: Half Arrow Segment
- CapSure Sidebar Protector
- MAWPs – on Side and Bottom
- Base End Edge Protector
- Adapter Top Cover
Please check out our Parts Catalog for more GET options.
CapSure™ Retention Technology
Simplify GET component replacement with hammerless CapSure retention for fast, easy and safe installation. CapSure tips, shrouds and sidebar protectors are easily locked and unlocked with a 180 degree turn of a 3∕4 inch ratchet.
System Match Efficiency
Application Match
The standard 994K is sized to load the 136 tonnes (150 ton) 785 in four passes. The 994K standard lift loads the 177 tonnes (195 ton) 789 in five passes, and loads the 227 tonnes (240 ton) 793 in six passes.
Efficient Combination
For full truck payloads with minimum loading time, an efficient loading/hauling system starts with a perfect match. Cat wheel loaders are matched with Cat mining trucks to maximize volume of material moved at the lowest operating cost per ton.
Bucket Selection
Selection of the right bucket depends on penetration requirements, material densities, abrasion, and the loading target. Bucket sizes are matched to truck bed capacities and material densities for optimum loading efficiency and greater productivity.
Standard Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
POWER TRAIN
- Engine, 3516E High Displacement (HD) Mechanical Electronic Unit Injector (MEUI™-A), Air-to-Air Aftercooling (ATAAC) diesel, turbocharged/aftercooled
- Engine prelube
- Fuel priming pump (electric)
- Ground-level engine shutoff
- Engine air intake (above hood) precleaner
- Aluminum Modular Radiator (AMR)
- Automatic, ether starting aid
- Electronic throttle lock
- Impeller Clutch Torque Converter (ICTC) with Lock-Up Clutch and rimpull control system
- Rimpull control system
- Planetary powershift, 3F/3R electronic control transmission
- Delayed engine shutdown
- Oil-cooled, multi-disc, service brakes
- Electro-hydraulic parking brake
-
LINKAGE
- Standard lift (40.8 tonnes/45 tons face, 54.4 tonnes/60 tons loose)
-
ELECTRICAL
- Alternator
- Dry batteries
- 10/15 amp, 24V to 12V converter
- Disconnect switch to bumper
- LED warning lights (pattern selectable)
- LED lighting system (working lights, access and service platform lights, turn signals/hazard lights)
- Emergency jump-start receptacle
- Starter and transmission lockout in bumper
- 24V starting and charging system
- Electric starters
- 24V starting and charging system
- Electric starters
-
OPERATOR ENVIRONMENT
- Bonded glass, tinted
- Premium seat with heated and actively cooled leather, adjustable lumbar support, air adjustable bolsters on the seat and backrest, seat cushion tilt adjustment, and adjustable length seat cushion
- Dual lever lift and tilt function controls
- Implement kickouts
- Air conditioner
- Cab pressure indicator
- Graphical touchscreen information display conveys real-time operating information and payload measurement
- Heater, defroster, auto temperature controls
-
Gauge instrumentation
– DEF Level, if equipped
– Coolant temperature
– Hydraulic oil temperature
– Fuel level
– Power train oil temperature
– Engine speed (tachometer)
– Transmission gear
– Ground speed
– Engine hour meter
-
Warning/indicator instrumentation
– Low DEF Level, if equipped
– Three category action alert system
– Brake malfunction
– Bucket float status
– Delayed engine shutdown status
– Engine idle shutdown status
– Engine malfunction
– Fuel economy mode enable status
– Hydraulic lockout
– Lockup clutch enable status
– Low fuel level
– Parking brake status
– Quick shift enable status
– Rimpull control enable status
– Seat belt warning
– Secondary steering
– Throttle lock status
– Transmission gear
– Turn signal
-
Keypad control with indicator lights
– Fuel economy mode
– Implement kickouts
– Lockup clutch
– Manual lube
– Quickshift enable
– Rimpull control system
– Side rearview mirror heater
– Throttle lock
– Turn signals
– Dash backlight control
– Hazard lights
- Dome light in cab
- Lunchbox and beverage holders
- Steering and Transmission Integrated Control (STIC™) system
- Sun screen, pull down (front and rear)
- Vital Information Management System (VIMS™) with Information Display: external data port, Cycle Timer, integrated Cat Production Measurement (CPM)
- Keypad, messenger, ET, VIMS
- Coat hook
-
SAFETY
- Electric (field and shop) horns
- Ground-access ladders
- Rear-vision camera
- Front frame access with steps
- Front walkway around cab
- Pump bay access ladders with T-handle and platform
- Tie-offs on ROPS and radiator guards
- Steering frame lock
- Stairways on both sides of the machine
- LED stairway and access lights
- Toe kicks
- Retractable seatbelt, 76 mm (3 in) wide
- Trainer seat with lap belt, 76 mm (3 in) wide
- Back-up alarm
- Secondary steering
-
MACHINE CONTROL AND GUIDANCE
- CPM Payload Weighing System
-
FUEL TANK
- 12 hour (3440 L/910 gal)
-
COOLING
- Standard ambient package (recommended for site conditions that do not exceed 43° C [110° F])
-
SERVICE
-
Ground-level service center including:
– Service center light
– Implement and cooling fan oil level indicator
– Steering and brake oil level indicator
– Window washer solvent level indicator
– Transmission oil level indicator
– DEF level indicator (if equipped)
– Fuel level indicator
– Engine oil level indicator
– Engine coolant level indicator
– Automatic lubrication system grease tank level indicator
– DEF purge indicator lamp
– Starter lockout and LED
– Heavy-duty battery disconnect switch
– Stairway light switch
– Service lighting switch (if equipped)
– Fuel shutoff engine shutdown switch
– Engine oil fast-fill port
– Transmission oil fast-fill port
– Steering and brake hydraulic oil fast-fill port
– Steering and brake hydraulic oil drain port
– Oil renewal system fast-fill port
– Engine coolant fast-fill port
– DEF fill port (HRC only)
– Implement and cooling fan hydraulic oil fast-fill port
– Implement and cooling hydraulic oil drain port
– Automatic lubrication system grease tank fill port
– 24V jump-start receptacle
– 240V jacket water and engine oil heater plug (if equipped)
– 12V power port
– VIMS key switch
– 14-pin machine data port
– VIMS Messenger display
- In-tank mounted cartridge-type case drain filters with in-line magnetic plugs on implement, cooling fan, brake and steering pumps
- High-pressure screens on the output side of implement, cooling fan, brake and steering pumps
- Pump efficiency monitoring
- Automatic lubrication system greases the linkage, hitch, steering and axle trunnion bearings
- Electronic pressure control of the automatic lubrication system eliminates pressure adjustment and monitors grease thickness for temperature compatibility
- Rock guards on linkage grease lines
- Cat O-ring face seal couplings
- Lockable service access doors
- Ecology drains for engine, radiator, hydraulic tank, steering and brake tank, brake cooling tank and axles
- High-speed engine oil change system
- Ground-level fast-fill fuel system
- Transmission guard
- Drawbar hitch with pin
- Cat XT™ hoses
- Left-side service center
- Oil sampling valves
-
Ground-level service center including:
-
EFFICIENCY
- Economy Mode
- Variable displacement implement pumps
- Variable displacement load sensing steering
- Variable displacement cooling fan pump
- Torque converter lock-up clutch
Optional Equipment
-
NOTE
- Standard and optional equipment may vary. Consult your Cat dealer for details.
-
SPARE RIMS
- 1118 mm (44") 152 mm (44 _ 57) (6") flange
- 1194 mm (47") 152 mm (44 _ 57) (6") flange
- 1194 mm (47") 127 mm (47 _ 57) (5") flange
-
SOUND
- Sound-suppression package
-
RIMS AND TIRES
- Rims – 1118 mm (44") (44 _ 57) 152 mm (6") flange. For use with 53.5/85-5776PR L5 tires
- Tires – 53.5/85-57 FS 76PR L5 (require 44" rims)
- Rims – 1194 mm (47") (47 _ 57) 127 mm (5") flange. For use with 60/80 R57L5R XMine D2 SR tires
- Tires – 58/85-57 84PR L4 (require 47" rims)
- Rims – 1194 mm (47") (47 _ 57) 152 mm (6") flange. For use with 58/85-5784PR L4 tires
-
ELECTRICAL
- Service lights
-
POWER TRAIN
- Oil Renewal System (ORS) (Not available on Tier 4 Final machines. Not available in all regions.)
-
LINKAGE
- High lift (38.1 tonnes/42 tons face, 49.9 tonnes/55 tons loose)
-
OPERATOR ENVIRONMENT
- Rubber-mounted, high-impact resistant solar control glass (Complies with AS/NZS 2080)
- Joystick lift and tilt function controls
- AM/FM/AUX radio
- AM/FM/AUX/USB/BT/CD/SAT radio
-
SAFETY
- Powered ground-access stairs
- Cat Detect (Rear Object Detection)
- Wheel chocks
-
COLD WEATHER
- Cold-weather cooling fan bypass (recommended for temperatures below –29° C [–20° F])
- Heavy-duty starter (provides an additional electric starter motor and two additional batteries for a total of three starter motors and six batteries) (recommended for temperatures below 0� C [32� F])
- 240V engine oil and coolant heating elements (recommended in conditions from –18° C to –30° C [0° F to –22° F])
- Fuel heater (heated by recirculation using engine heat and a heat exchanger) (recommended in conditions from –18° C to –30° C [0° F to –22° F])
- Heated mirrors (recommended for below-freezing temperatures)
-
MACHINE CONTROL AND GUIDANCE
- Cat Terrain ready
-
FUEL TANK
- 24 hour (5700 L/1,506 gal)
-
COOLING
- High ambient package (recommended for site conditions that do not exceed 53° C [127° F])
